source: debian/patches/0001-path-substitution.patch @ 822ec4a

Last change on this file since 822ec4a was 822ec4a, checked in by kytv <kytv@…>, 7 years ago

Debian: patch refresh

  • Property mode set to 100644
File size: 23.0 KB
  • installer/resources/eepget

    From: Kill Your TV <killyourtv@i2pmail.org>
    Date: Mon, 18 Apr 2011 16:43:40 +0000
    Subject: path substitution
    
    The purpose of this patch is the change the values handled by
    the Izpack based installer.
    
    Non-applicable sections (e.g., portable & windows) are also removed for the
    Debian wrapper.config to try to prevent confusion.
    ---
     installer/resources/eepget         |    2 +-
     installer/resources/i2prouter      |   82 ++++--------------------------------
     installer/resources/runplain.sh    |    4 +-
     installer/resources/wrapper.config |   70 ++++++------------------------
     4 files changed, 24 insertions(+), 134 deletions(-)
    
    a b  
    11#!/bin/sh
    2 I2P="%INSTALL_PATH"
     2I2P="/usr/share/i2p"
    33java -cp "$I2P/lib/i2p.jar" net.i2p.util.EepGet "$@"
  • installer/resources/i2prouter

    a b  
    1010# wrapper configuration file.
    1111#
    1212# If this script fails to successfully invoke i2psvc on your platform,
    13 # try the runplain.sh script instead.
     13# try the i2prouter-nowrapper script instead.
    1414#
    1515# This software is the proprietary information of Tanuki Software.
    1616# You shall use it only in accordance with the terms of the
     
    2424# These settings can be modified to fit the needs of your application
    2525# Optimized for use with version 3.5.22 of the Wrapper.
    2626
    27 # Paths
    28 # Note that (percent)INSTALL_PATH, (percent)USER_HOME,  and (percent)SYSTEM_java_io_tmpdir
    29 # should have been replaced by the izpack installer.
    30 # If you did not run the installer, replace them with the appropriate paths.
    31 I2P="%INSTALL_PATH"
    32 if [ "`uname -s`" = "Darwin" ]; then
    33    if [ -d "%USER_HOME/Library/Application Support" ]; then
    34        I2P_CONFIG_DIR="%USER_HOME/Library/Application Support/i2p"
    35    else
    36        I2P_CONFIG_DIR="%USER_HOME/.i2p"
    37    fi
    38 else
    39     I2P_CONFIG_DIR="%USER_HOME/.i2p"
    40 fi
    41 I2PTEMP="%SYSTEM_java_io_tmpdir"
     27# Read config file if found
     28[ -f /etc/default/i2p ] && . /etc/default/i2p
     29
     30I2P="/usr/share/i2p"
     31I2P_CONFIG_DIR="$HOME/.i2p"
     32I2PTEMP="/tmp"
    4233# PORTABLE installation:
    4334# Use the following instead.
    4435#I2PTEMP="%INSTALL_PATH"
     
    6960#RUN_AS_USER=
    7061
    7162# Wrapper
    72 WRAPPER_CMD="$I2P/i2psvc"
    73 WRAPPER_CONF="$I2P/wrapper.config"
     63WRAPPER_CMD="/usr/sbin/wrapper"
     64WRAPPER_CONF="/etc/i2p/wrapper.config"
    7465
    7566# Priority at which to run the wrapper.  See "man nice" for valid priorities.
    7667#  nice is only used if a priority is specified.
     
    167158
    168159# Do not modify anything beyond this point
    169160#-----------------------------------------------------------------------------
     161JAVABINARY=$(awk -F'=' '/^ *wrapper\.java\.command/{print $2}' "$WRAPPER_CONF")
     162
    170163if [ ! -e "$WRAPPER_CONF" ]; then
    171164       echo "Starting I2P Failed: Unable to find $WRAPPER_CONF"
    172165       exit 1
    173166fi
    174167
    175 # Workaround for Gentoo
    176 JAVABINARY=$(awk -F'=' '/^ *wrapper\.java\.command/{print $2}' "$WRAPPER_CONF")
    177 
    178 if [ -e /etc/gentoo-release ]; then
    179     if [ $JAVABINARY = java ]; then
    180         if [ -x /etc/java-config-2/current-system-vm/bin/java ]; then
    181             JAVABINARY="/etc/java-config-2/current-system-vm/bin/java"
    182         else
    183             echo "Please set wrapper.java.command in $WRAPPER_CONF"
    184             exit 1
    185         fi
    186     fi
    187 fi
    188 
    189 WRAPPER_URL="http://www.i2p2.de/manualwrapper"
    190 unsupported() {
    191     echo "The most likely reason is that a supported version of the java"
    192     echo "wrapper is not available in the I2P installation package for your"
    193     echo "platform. It may be possible to manually download and install"
    194     echo "a compatible wrapper for your system."
    195     echo "See ${WRAPPER_URL} for hints."
    196     echo
    197     echo "In the meantime, you may start I2P by running the script"
    198     echo "${I2P}/runplain.sh"
    199     echo
    200 }
    201 
    202 failed() {
    203         echo "**`gettext 'Failed to load the wrapper'`**"
    204         case `uname -s` in
    205              FreeBSD)
    206                 # We should never get here on recent versions of FreeBSD
    207                 if ! $(pkg_info -E 'libiconv*' > /dev/null 2>&1); then
    208                     echo
    209                     echo "The wrapper requires libiconv."
    210                     echo
    211                     echo "It can be installed with pkg_add -r libiconv"
    212                     echo
    213                 fi
    214                 ;;
    215              *)
    216                 echo
    217                 unsupported
    218                 ;;
    219         esac
    220         exit 1
    221 }
    222 
    223 if $(which ldd > /dev/null 2>&1); then
    224     # This should cover every *NIX other than OSX since OSX doesn't have ldd.
    225     # OSX has otool. Is otool on every OSX installation? Is otool's output the same as ldd's?
    226     # The wrapper we ship for OSX are for PPC and Intel, so maybe we don't need to worry about OSX?
    227     if (ldd "$WRAPPER_CMD" |grep -q 'not found') > /dev/null 2>&1 || \
    228                          ! (ldd "$WRAPPER_CMD" > /dev/null 2>&1); then
    229         failed
    230     fi
    231 fi
    232 
    233168if [ -n "$FIXED_COMMAND" ]
    234169then
    235170    COMMAND="$FIXED_COMMAND"
     
    944879
    945880        # The string passed to eval must handles spaces in paths correctly.
    946881        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.java.command=\"$JAVABINARY\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" $ANCHORPROP $STATUSPROP $COMMANDPROP $LOCKPROP $LOGPROP wrapper.script.version=3.5.22 $ADDITIONAL_PARA"
    947         eval $COMMAND_LINE || failed
     882        eval $COMMAND_LINE
    948883    else
    949884        eval echo `gettext '$APP_LONG_NAME is already running.'`
    950885        exit 1
     
    1001936        if [ "X$pid" = "X" ]
    1002937        then
    1003938            eval echo " `gettext 'WARNING: $APP_LONG_NAME may have failed to start.'`"
    1004             failed
    1005939        else
    1006940            eval echo ' running: PID:$pid'
    1007941        fi
     
    18041738}
    18051739
    18061740showsetusermesg()  {
    1807     echo "`gettext 'Please edit i2prouter and set the variable RUN_AS_USER'`."
     1741    echo "`gettext 'Please edit /etc/default/i2p and set the variable RUN_AS_USER'`."
    18081742}
    18091743
    18101744checkifstartingasroot() {
     
    18121746        echo "`gettext 'Running I2P as the root user is *not* recommended.'`"
    18131747        showsetusermesg
    18141748        echo
    1815         echo "`gettext 'To run as root anyway, edit i2prouter and set ALLOW_ROOT=true.'`"
     1749        echo "`gettext 'To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true.'`"
    18161750        exit 1
    18171751    fi
    18181752}
     
    18771811            status
    18781812            ;;
    18791813
    1880         'install')
    1881             installdaemon
    1882             if [ ! `grep ^RUN_AS_USER $0` ]; then
    1883                  echo
    1884                  showsetusermesg
    1885             fi
    1886             echo
    1887             echo "You may want to disable the browser from launching at startup at"
    1888             echo "http://127.0.0.1:7657/configclients"
    1889             echo
    1890             echo "I2P_CONFIG_DIR is currently set to $I2P_CONFIG_DIR."
    1891             echo "Change the value in $0 if this is not"
    1892             echo "appropriate for your configuration."
    1893             ;;
    1894 
    1895         'remove' | 'uninstall')
    1896             removedaemon
    1897             ;;
     1814        'install' | 'remove' | 'uninstall')
     1815            echo "Use \"dpkg-reconfigure i2p\" to configure the initscript."
     1816            exit 1
     1817            ;;
    18981818
    18991819        'dump')
    19001820            checkUser "" "$COMMAND"
  • installer/resources/runplain.sh

    a b  
    1111# Note that (percent)INSTALL_PATH and (percent)SYSTEM_java_io_tmpdir
    1212# should have been replaced by the izpack installer.
    1313# If you did not run the installer, replace them with the appropriate path.
    14 I2P="%INSTALL_PATH"
    15 I2PTEMP="%SYSTEM_java_io_tmpdir"
     14I2P="/usr/share/i2p"
     15I2PTEMP="/tmp"
    1616
    1717# Having IPv6 enabled can cause problems with certain configurations. Changing the
    1818# next value to true may help.
  • installer/resources/wrapper.config

    a b  
    88# click "Shutdown", wait 11 minutes, then start i2p.
    99#
    1010# WARNING - The wrapper is NOT run (and this file is not used)
    11 # if you start I2P with the 'no window' icon on Windows, or
    12 # with the runplain.sh script on Linux. Use the 'restartable'
    13 # icon on Windows or the i2prouter script on Linux to run the wrapper.
     11# if you start I2P with the i2prouter-nowrapper script in Linux.
     12# Use i2prouter or the initscript to run the wrapper.
    1413#
    1514# NOTE - Directory organization:
    1615# The standard I2P Installation will set up a "split" directory structure
    1716# with code in the install directory, data and configuration files in the
    1817# user's home directory, and temporary files in the system temporary directory.
    19 # To set up a single-directory "portable" installation suitable for
    20 # a USB stick, make several changes specified below (search for PORTABLE).
    21 #
    22 # NOTE - The izpack installer performs variable subsitiution on this
    23 # file upon installation. If you did not use izpack, you must
    24 # find and replace all instances of (dollar)INSTALL_PATH and
    25 # (dollar)SYSTEM_java_io_tmpdir with appropriate values
    26 # (perhaps . and /var/tmp, respectively)
    2718#
    2819#********************************************************************
    2920# Java Application
     
    6051# classes, or all the classes of i2p.jar, are in a different directory).
    6152# Be sure there are no other duplicate classes.
    6253#
    63 wrapper.java.classpath.1=$INSTALL_PATH/lib/*.jar
     54wrapper.java.classpath.1=/usr/share/i2p/lib/*.jar
     55wrapper.java.classpath.2=/usr/share/java/wrapper.jar
    6456#  uncomment this to use the system classpath as well (e.g. to get tools.jar)
    65 # wrapper.java.classpath.2=%CLASSPATH%
     57# wrapper.java.classpath.3=%CLASSPATH%
    6658
    67 # Java Library Path (location of Wrapper.DLL or libwrapper.so)
    68 wrapper.java.library.path.1=$INSTALL_PATH
    69 wrapper.java.library.path.2=$INSTALL_PATH/lib
     59# Java Library Path (location of libjbigi/libjcpuid)
     60wrapper.java.library.path.1=/usr/lib/jni
     61wrapper.java.library.path.2=/usr/share/java/lib
    7062
    7163# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
    7264wrapper.java.additional.auto_bits=TRUE
     
    7668wrapper.java.additional.1=-DloggerFilenameOverride=logs/log-router-@.txt
    7769wrapper.java.additional.2=-Dorg.mortbay.http.Version.paranoid=true
    7870wrapper.java.additional.3=-Dorg.mortbay.xml.XmlParser.NotValidating=true
    79 wrapper.java.additional.4=-Di2p.dir.base="$INSTALL_PATH"
     71wrapper.java.additional.4=-Di2p.dir.base=/usr/share/i2p
    8072wrapper.java.additional.4.stripquotes=TRUE
    8173
    8274# On some IPv6 enabled systems, I2P and other network-enabled java applications
     
    143135# You may wish to change this.
    144136# NOTE: On Linux/Mac this is overridden in the i2prouter script; changes here will have no effect.
    145137# System temp directory:
    146 wrapper.logfile=$SYSTEM_java_io_tmpdir/wrapper.log
    147 # PORTABLE installation:
    148 # Use the following instead. I2P will find the logfile here,
    149 # no need for a wrapper.java.additional line too.
    150 #wrapper.logfile=$INSTALL_PATH/wrapper.log
     138#wrapper.logfile=/tmp/wrapper.log
    151139
    152140# Format of output for the log file.
    153141# The format consists of the tokens 'L' for log level, 'P' for prefix, 'D' for thread,
     
    217205# Linux/Mac users, do not set here, see settings in the i2prouter script.
    218206# Directory must exist or the wrapper will fail to start.
    219207# System temp directory:
    220 #wrapper.java.pidfile=$SYSTEM_java_io_tmpdir/routerjvm.pid
    221 # PORTABLE installation:
    222 # Use the following instead.
    223 #wrapper.java.pidfile=$INSTALL_PATH/routerjvm.pid
    224 # pid file for the service monitoring the JVM
     208#wrapper.java.pidfile=/tmp/routerjvm.pid
    225209#
    226210# From i2prouter:
    227211#
     
    235219# Linux/Mac users, do not set here, see settings in the i2prouter script.
    236220# Directory must exist or the wrapper will fail to start.
    237221# System temp directory:
    238 #wrapper.pidfile=$SYSTEM_java_io_tmpdir/i2p.pid
    239 # PORTABLE installation:
    240 # Use the following instead.
    241 #wrapper.pidfile=$INSTALL_PATH/i2p.pid
     222#wrapper.pidfile=/tmp/i2p.pid
    242223
    243224#********************************************************************
    244225# Wrapper General Properties
     
    255236wrapper.umask=0022
    256237wrapper.java.umask=0022
    257238wrapper.logfile.umask=0077
    258 
    259 #********************************************************************
    260 # Wrapper NT Service Properties
    261 #********************************************************************
    262 # WARNING - Do not modify any of these properties when an application
    263 #  using this configuration file has been installed as a service.
    264 #  Please uninstall the service before modifying this section.  The
    265 #  service can then be reinstalled.
    266 
    267 # Name of the service
    268 wrapper.ntservice.name=i2p
    269 
    270 # Display name of the service
    271 wrapper.ntservice.displayname=I2P Service
    272 
    273 # Description of the service
    274 wrapper.ntservice.description=The I2P router service
    275 
    276 # Service dependencies.  Add dependencies as needed starting from 1
    277 wrapper.ntservice.dependency.1=
    278 
    279 # Mode in which the service is installed.  AUTO_START or DEMAND_START
    280 wrapper.ntservice.starttype=AUTO_START
    281 
    282 # Allow the service to interact with the desktop.
    283 wrapper.ntservice.interactive=false
    284 
  • installer/resources/locale/po/messages_de.po

    a b  
    192192msgstr "Falls gestartet, fordere einen Java Thread dump an"
    193193
    194194#: ../i2prouter:1803
    195 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    196 msgstr "Bitte bearbeite i2prouter und setze die Variable RUN_AS_USER"
     195msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     196msgstr "Bitte bearbeite /etc/default/i2p und setze die Variable RUN_AS_USER"
    197197
    198198#: ../i2prouter:1808
    199199msgid "Running I2P as the root user is *not* recommended."
    200200msgstr "I2P als root Benutzer auszuführen ist *nicht* empfehlenswert."
    201201
    202202#: ../i2prouter:1811
    203 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     203msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    204204msgstr ""
    205 "Um I2P trotzdem als root auszuführen bearbeite i2prouter und setze "
     205"Um I2P trotzdem als root auszuführen bearbeite /etc/default/i2p und setze "
    206206"ALLOW_ROOT=true."
  • installer/resources/locale/po/messages_en.po

    a b  
    185185msgstr ""
    186186
    187187#: ../i2prouter:1807
    188 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
     188msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
    189189msgstr ""
    190190
    191191#: ../i2prouter:1812
     
    193193msgstr ""
    194194
    195195#: ../i2prouter:1815
    196 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     196msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    197197msgstr ""
  • installer/resources/locale/po/messages_it.po

    a b  
    187187msgstr ""
    188188
    189189#: ../i2prouter:1807
    190 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
     190msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
    191191msgstr ""
    192192
    193193#: ../i2prouter:1812
     
    195195msgstr ""
    196196
    197197#: ../i2prouter:1815
    198 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     198msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    199199msgstr ""
  • installer/resources/locale/po/messages_zh.po

    a b  
    187187msgstr "请求Java转储(如果在运行)。"
    188188
    189189#: ../i2prouter:1807
    190 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    191 msgstr "请编辑 i2prouter 设置 RUN_AS_USER 变量"
     190msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     191msgstr "请编辑 /etc/default/i2p 设置 RUN_AS_USER 变量"
    192192
    193193#: ../i2prouter:1812
    194194msgid "Running I2P as the root user is *not* recommended."
    195195msgstr "推荐 *不要* 以 root 身份运行 I2P 。"
    196196
    197197#: ../i2prouter:1815
    198 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
    199 msgstr "要以root运行,请编辑 i2prouter 并设置 ALLOW_ROOT=true。"
     198msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
     199msgstr "要以root运行,请编辑 /etc/default/i2p 并设置 ALLOW_ROOT=true。"
  • installer/resources/locale/po/messages_tr.po

    a b  
    186186msgstr "Çalışıyorsa Java iş parçacığı dökümü isteyin."
    187187
    188188#: ../i2prouter:1796
    189 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    190 msgstr "i2prouter dosyasını düzenleyin ve RUN_AS_USER değişkenini ayarlayın"
     189msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     190msgstr "/etc/default/i2p dosyasını düzenleyin ve RUN_AS_USER değişkenini ayarlayın"
    191191
    192192#: ../i2prouter:1801
    193193msgid "Running I2P as the root user is *not* recommended."
    194194msgstr "I2P yazılımının root olarak çalıştırmanız *önerilmez*."
    195195
    196196#: ../i2prouter:1804
    197 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
    198 msgstr "Root olarak çalıştırmak için i2prouter dosyasını düzenleyin ve ALLOW_ROOT=true ayarını yapın."
     197msgid "To run as root anyway, edit /etc/defalt/i2p and set ALLOW_ROOT=true."
     198msgstr "Root olarak çalıştırmak için /etc/default/i2p dosyasını düzenleyin ve ALLOW_ROOT=true ayarını yapın."
  • installer/resources/locale/po/messages_es.po

    a b  
    193193msgstr "Solicitar un volcado del hilo JAVA si se está ejecutando."
    194194
    195195#: ../i2prouter:1807
    196 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    197 msgstr "Por favor edite i2prouter e introduzca la variable RUN_AS_USER"
     196msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     197msgstr "Por favor edite /etc/default/i2p e introduzca la variable RUN_AS_USER"
    198198
    199199#: ../i2prouter:1812
    200200msgid "Running I2P as the root user is *not* recommended."
    201201msgstr "\"No\" se recomienda ejecutar I2P como root."
    202202
    203203#: ../i2prouter:1815
    204 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     204msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    205205msgstr ""
    206 "Para ejecutar como root de todos modos, edite i2prouter y ponga la variable "
     206"Para ejecutar como root de todos modos, edite /etc/default/i2p y ponga la variable "
    207207"ALLOW_ROOT=true."
  • installer/resources/locale/po/messages_pt.po

    a b  
    189189msgstr "Requisitar o histórico Java se iniciado."
    190190
    191191#: ../i2prouter:1796
    192 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    193 msgstr "Favor editar o arquivo i2prouter e configurar a variável RUN_AS_USER"
     192msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     193msgstr "Favor editar o arquivo /etc/default/i2p e configurar a variável RUN_AS_USER"
    194194
    195195#: ../i2prouter:1801
    196196msgid "Running I2P as the root user is *not* recommended."
    197197msgstr "Iniciar I2P como permissões root *não* é recomendado."
    198198
    199199#: ../i2prouter:1804
    200 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     200msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    201201msgstr ""
    202 "Para executar como root mesmo assim, editar o i2prouter e configurar a "
     202"Para executar como root mesmo assim, editar o /etc/default/i2p e configurar a "
    203203"variável ALLOW_ROOT=true."
  • installer/resources/locale/po/messages_fr.po

    a b  
    190190msgstr "Request a Java thread dump if running."
    191191
    192192#: ../i2prouter:1807
    193 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    194 msgstr "Veuillez éditer i2prouter et paramétrer la variable RUN_AS_USER"
     193msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     194msgstr "Veuillez éditer /etc/default/i2p et paramétrer la variable RUN_AS_USER"
    195195
    196196#: ../i2prouter:1812
    197197msgid "Running I2P as the root user is *not* recommended."
     
    199199"Faire fonctionner I2P en tant qu'utilisateur root n'est *pas* recommandé."
    200200
    201201#: ../i2prouter:1815
    202 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     202msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    203203msgstr ""
    204 "Pour exécuter en tant que root de toute façon, éditer i2prouter et mettre "
     204"Pour exécuter en tant que root de toute façon, éditer /etc/default/i2p et mettre "
    205205"ALLOW_ROOT=true."
  • installer/resources/locale/po/messages_ru.po

    a b  
    190190msgstr "Запросить дамп нитей Java, если запущено."
    191191
    192192#: ../i2prouter:1803
    193 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
     193msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
    194194msgstr ""
    195 "Пожалуйста отредактируйте i2prouter и установите переменную RUN_AS_USER"
     195"Пожалуйста отредактируйте /etc/default/i2p и установите переменную RUN_AS_USER"
    196196
    197197#: ../i2prouter:1808
    198198msgid "Running I2P as the root user is *not* recommended."
    199199msgstr "Запуск I2P от имени root НЕ рекомендовано."
    200200
    201201#: ../i2prouter:1811
    202 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     202msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    203203msgstr ""
    204 "Чтобы всё равно запустить из-под root, отредактируйте i2prouter и установите "
     204"Чтобы всё равно запустить из-под root, отредактируйте /etc/default/i2p и установите "
    205205"ALLOW_ROOT=true."
  • installer/resources/locale/po/messages_sv.po

    a b  
    187187msgstr "Fråga efter en Java thread dump vid drift."
    188188
    189189#: ../i2prouter:1807
    190 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    191 msgstr "Var god ändra i2prouter och set variabeln RUN_AS_USER"
     190msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     191msgstr "Var god ändra /etc/default/i2p och set variabeln RUN_AS_USER"
    192192
    193193#: ../i2prouter:1812
    194194msgid "Running I2P as the root user is *not* recommended."
    195195msgstr "Att köra I2P som användare root är *inte* rekommenderat."
    196196
    197197#: ../i2prouter:1815
    198 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     198msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    199199msgstr ""
    200 "För att köra som root oavsett, ändra i2prouter och sätt ALLOW_ROOT=true"
     200"För att köra som root oavsett, ändra /etc/default/i2p och sätt ALLOW_ROOT=true"
  • installer/resources/locale/po/messages_ro.po

    a b  
    187187msgstr "Solicitarea dump-ului firului Java daca este pornit"
    188188
    189189#: ../i2prouter:1807
    190 msgid "Please edit i2prouter and set the variable RUN_AS_USER"
    191 msgstr "Vă rugăm să editați i2prouter și setați variabila RUN_AS_USER "
     190msgid "Please edit /etc/default/i2p and set the variable RUN_AS_USER"
     191msgstr "Vă rugăm să editați /etc/default/i2p și setați variabila RUN_AS_USER "
    192192
    193193#: ../i2prouter:1812
    194194msgid "Running I2P as the root user is *not* recommended."
    195195msgstr "Rularea I2P ca root *nu* este recomandată."
    196196
    197197#: ../i2prouter:1815
    198 msgid "To run as root anyway, edit i2prouter and set ALLOW_ROOT=true."
     198msgid "To run as root anyway, edit /etc/default/i2p and set ALLOW_ROOT=true."
    199199msgstr ""
    200 "Pentru a rula ca root, oricum, editati i2prouter și setați ALLOW_ROOT = "
     200"Pentru a rula ca root, oricum, editati /etc/default/i2p și setați ALLOW_ROOT = "
    201201"true."
Note: See TracBrowser for help on using the repository browser.